Here's what you get:
-4 bushing halves (they are a split bushing so two pieces press into each end to make 2 complete bushings)
-2 crush tubes with a bore for the stock 12mm bolt
-Oh, and here's a nice thing - it won't affect your alignment settings when you install them!
Here's a few details on the bushings:
-The bushings themselves are made from medical grade urethane and are Shore 95A hardness (that's pretty stiff). On top of that we had them impregnated with graphite so they are self lubricating. Now I wouldn't go so far as to call them maintenance free, but they are maintenance reduced.
-Nice and stiff to cut down on wiggle
-The crush tubes! There's really not much glamorous when it comes to crush tubes, but we're out to set a new standard on these. Instead of just some metal tube that's cut to length and then (sometimes) zinc plated we stepped up and made them even better. Machined from solid stock these STAINLESS STEEL crush tubes feature chamfered outter edges to help with the install, we broke the hard inside edge to keep things from rubbing or cutting or wearing funny, and we had the inside reamed smooth for ease of motion while in operation.