The ATP front mount intercooler system for the Mazdaspeed3 features a Garrett GT high density bar and plate intercooler core, capable of supporting up to 400 horsepower while effectively reducing intake air temperatures by over 30°. This intercooler kit will allow the MS3 to operate at full power without holding back due to intercooler heat soak. Power gains are huge on a stock or upgraded turbo utilizing this intercooler system, ATP has observed an incredible performance difference of +38hp and +46 ft/lbs of torque over stock with this intercooler and a short ram intake alone! By lowering the peak operating temperature, the chance of engine knock is also significantly reduced under heavy acceleration and aggressive driving.
Need more power? A larger 600hp capable intercooler core is also available. The Garrett 600hp core may require some trimming or cutting of the stock bumper support to install.
The ATP FMIC is a direct bolt on for the Mazdaspeed3 and does not require any bumper cutting to install. Multi-layer silicone couplers, T-bolt clamps, hardware and complete installation instructions are included for a true bolt-on front mount intercooler solution for your MS3. The hotside turbo pipe is pre-flanged for an HKS compatible blow off valve, but can be swapped upon request. The ATP front mount intercooler kit is available with blue, black or red silicone couplers.